Bereits ein Benutzerkonto
Passwort vergessen?
Bitte geben Sie die gleiche E-Mailadresse ein, die für die Erstellung des Benutzerkontos angegeben wurde..
Nachricht an das Unternehmen
Einzelheiten Ihrer Anfrage oder Ihres Projektes
Identifiants de connexion sont incorrects
Le nom d'utilisateur et mot de passe ne correspondent pas, ou alors vous n'avez pas encore de compte.
Identifiants de connexion sont incorrects
Le nom d'utilisateur et mot de passe ne correspondent pas, ou alors vous n'avez pas encore de compte.
Nachricht
Ihre Anfrage wurde erfolgreich registriert
Die folgende Tabelle vergleicht den Großteil aller 2D Laserschneidanlagen für die Blechbearbeitung (Stahl, Edelstahl, Aluminium etc.) und erlaubt einen Kontakt mit dem jeweiligen Hersteller. Der Vergleich erfolgt nach technischen Kriterien und die Produktionsanlagen können kostenlos durch die Anbieter registriert werden, wodurch das Vergleichs-Tool eine beeindruckende Ausführlichkeit aufweist. Durch passendes Einstellen der technischen Kriterien können Sie außerdem die Maschinen herausfiltern, die Ihren Anforderungen am ehesten entsprechen. Schauen Sie auch in den Kaufleitfaden unten auf der Seite.
Foto | Produktfamilie | Produkt | |||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- |
Eagle
|
iNspire |
iNspire |
Faserlaser | 12000 | 12000 | 3000 | 100 | 25 | Nein | 2300 | 12000 | 3000 | 250 | 250 | 250 | 350 | 150 | Ja | 0.03 | 0.05 | 61 | Breite | 24500 | Nein | ||
- |
BYSTRONIC
|
ByCut Smart |
ByCut Smart 6225 6000W |
Faserlaser | 6000 | 6240 | 2540 | 150 | 0 | Nein | 3650 | 6200 | 2500 | 100 | 100 | 200 | 140 | 0 | Ja | 0.1 | 0.1 | 25 | Länge | 21000 | Nein | ||
- |
ADIRA
|
LP |
LP 4020 |
CO2 | 4500 | 4050 | 2025 | 125 | 25 | keine Angabe | 0 | 4000 | 2000 | 200 | 200 | 120 | 280 | 0 | keine Angabe | 0.02 | 0.05 | 0 | - | 25000 | Nein | ||
- |
AMADA
|
LC F1 |
LC 3015 F1 NT - AF 4000i-B |
CO2 | 4000 | 3270 | 1550 | 100 | 20 | keine Angabe | 920 | 3000 | 1500 | 120 | 120 | 120 | 170 | 60 | keine Angabe | 0.01 | 0.005 | 0 | - | 11000 | Nein | ||
- |
TRUMPF
|
TruLaser serie 5000 |
TruLaser 5040 8 kw |
C02 | 8000 | 4000 | 2000 | 115 | 50 | Nein | 0 | 4000 | 2000 | 140 | 200 | 80 | 300 | 0 | Ja | 0.05 | 0.05 | 0 | Länge und Breite | 14000 | Nein | ||
- |
Eagle
|
eVision |
eVision |
Faserlaser | 6000 | 3060 | 1540 | 100 | 20 | Nein | 900 | 3000 | 1500 | 150 | 150 | 150 | 250 | 100 | Ja | 0.03 | 0.05 | 31 | Breite | 18100 | Nein | ||
- |
SALVAGNINI
|
L3 |
L3-4020 |
Faserlaser | 6000 | 4064 | 2032 | 100 | 25 | Nein | 0 | 4064 | 2032 | 120 | 120 | 0 | 0 | 0 | Ja | 0.03 | 0.03 | 28 | Länge | 0 | Ja | ||
- |
LVD
|
Impuls |
IMPULS 4020 R |
CO2 Flux Axial | 6000 | 3150 | 4070 | 280 | 25 | keine Angabe | 0 | 4000 | 2000 | 85 | 85 | 0 | 0 | 0 | keine Angabe | 0.025 | 0.005 | 0 | - | 0 | Nein | ||
- |
MITSUBISHI
|
eX-Plus Fibre |
- | 0 | 0 | 0 | 0 | 0 | Nein | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | Nein | 0 | 0 | 0 | - | 0 | Nein | |||
- |
TCI Cutting
|
SPEEDLINE FIBER |
- | 6000 | 6000 | 3000 | 100 | 25 | Ja | 950 | 6000 | 3000 | 0 | 0 | 0 | 160 | 0 | Ja | 0.025 | 160 | 0 | - | 0 | Ja | |||
- |
LVD
|
Impuls |
IMPULS 12530 |
CO2 Flux Axial | 6000 | 3150 | 4070 | 280 | 25 | keine Angabe | 0 | 12500 | 3100 | 85 | 85 | 0 | 0 | 0 | keine Angabe | 0.025 | 0.05 | 0 | - | 0 | Nein | ||
- |
AMADA
|
LCG 3.5kW |
- | 3500 | 3050 | 1570 | 100 | 20 | Nein | 920 | 3000 | 1500 | 0 | 0 | 0 | 170 | 35 | Ja | 0.05 | 0.05 | 58 | - | 0 | Ja | |||
- |
BALLIU
|
RP 1500 |
- | 4000 | 1525 | 3150 | 100 | 20 | Ja | 900 | 3000 | 1500 | 60 | 60 | 0 | 85 | 0 | Nein | 0 | 0 | 0 | - | 0 | Nein | |||
- |
HACO
|
Raptor 3015 |
CO2 Flux Axial | 3000 | 1550 | 3050 | 170 | 0 | keine Angabe | 0 | 1500 | 3000 | 75 | 75 | 75 | 0 | 15 | keine Angabe | 0 | 0.03 | 0 | - | 11000 | Nein | |||
- |
DURMA
|
HD-F SERIES |
HD-FL 3015 IPG 2kw |
- | 2000 | 3060 | 1550 | 200 | 12 | Ja | 1000 | 3000 | 1500 | 200 | 200 | 90 | 280 | 0 | Ja | 0.02 | 0.02 | 8 | - | 1200 | Nein | ||
- |
BYSTRONIC
|
ByStar Fiber |
ByStar Fiber 4020 - Fiber 4000W |
Faserlaser | 4000 | 4105 | 2100 | 100 | 20 | Nein | 1900 | 4000 | 2000 | 120 | 120 | 20 | 170 | 50 | Ja | 0.05 | 0.05 | 23 | Länge | 14500 | Nein | ||
- |
AMADA
|
LC ALPHA IV |
LC 1212 - AF4000 E |
CO2 | 4000 | 1270 | 1270 | 300 | 0 | keine Angabe | 0 | 0 | 0 | 80 | 80 | 60 | 0 | 20 | keine Angabe | 0 | 0.01 | 0 | - | 6000 | Nein | ||
- |
TRUMPF
|
TruLaser serie 3000 |
TruLaser 3040 Fiber 4kw |
Faserlaser | 4000 | 4000 | 2000 | 115 | 25 | Ja | 0 | 4000 | 2000 | 100 | 100 | 80 | 140 | 0 | Ja | 0.05 | 0.05 | 42 | Länge und Breite | 0 | Nein | ||
- |
TRUMPF
|
TruLaser serie 3000 |
TruLaser 3030 5 kw |
CO2 | 5000 | 3000 | 1500 | 115 | 25 | Ja | 0 | 3000 | 1500 | 100 | 100 | 80 | 140 | 0 | Ja | 0.05 | 0.05 | 0 | Länge und Breite | 12000 | Nein | ||
- |
TRUMPF
|
TruLaser serie 2000 |
TruLaser 2525 |
CO2 | 3200 | 2500 | 1250 | 100 | 0 | Nein | 500 | 2500 | 1250 | 60 | 60 | 40 | 85 | 0 | keine Angabe | 0 | 0 | 0 | - | 0 | Nein | ||
- |
BYSTRONIC
|
ByStar Fiber |
ByStar Fiber 3015 Fiber 12 000W |
Faserlaser | 12000 | 3100 | 1580 | 100 | 0 | Ja | 1100 | 3000 | 1500 | 120 | 120 | 20 | 170 | 0 | Ja | 0.05 | 0.05 | 27 | Länge | 11000 | Nein | ||
- |
BODOR
|
I5 |
Laser fibre BODOR i5. |
- | 1000 | 1000 | 1500 | 75 | 12 | Nein | 250 | 1300 | 900 | 60 | 60 | 60 | 60 | 0 | Nein | 0.02 | 0.03 | 11 | - | 2000 | Nein | ||
- |
BYSTRONIC
|
BySmart Fiber |
BySmart Fiber 4020 2000W |
Faserlaser | 2000 | 4120 | 2100 | 100 | 0 | Nein | 3200 | 4000 | 2000 | 100 | 100 | 20 | 140 | 0 | Ja | 0.1 | 0.1 | 18 | Länge | 14800 | Nein | ||
- |
BODOR
|
Laser Plat BODOR C6 - 6000W Fibre source IPG |
- | 6000 | 6100 | 2500 | 300 | 0 | Nein | 2950 | 6000 | 2500 | 130 | 130 | 0 | 0 | 0 | Nein | 0.03 | 0.05 | 0 | - | 12000 | Nein | |||
- |
BYSTRONIC
|
ByStar Fiber |
ByStar Fiber 8025 12 000W |
Faserlaser | 12000 | 8150 | 2600 | 150 | 0 | Nein | 4710 | 8000 | 2500 | 120 | 120 | 20 | 170 | 0 | Ja | 0.1 | 0.1 | 28 | Länge | 27500 | Nein | ||
- |
HACO
|
Raptor 4020 |
CO2 Flux Axial | 3000 | 2050 | 6050 | 170 | 0 | keine Angabe | 0 | 2000 | 4300 | 75 | 75 | 75 | 0 | 15 | keine Angabe | 0 | 0.03 | 0 | - | 14000 | Nein | |||
- |
TECHNOLOGY
|
Tecnolaser |
TECNOLASER |
- | 2000 | 3050 | 1510 | 180 | 10 | Nein | 350 | 3000 | 1500 | 100 | 65 | 0 | 120 | 1.3 | keine Angabe | 0.03 | 0.1 | 0 | - | 5500 | Nein | ||
- |
TCI Cutting
|
DYNAMICLINE 3015 FIBER |
- | 8000 | 1590 | 3100 | 80 | 0 | Nein | 950 | 3000 | 1500 | 120 | 120 | 0 | 340 | 0 | Ja | 0.025 | 0.05 | 96 | - | 5700 | Ja | |||
- |
ADIRA
|
LE |
LE 1530 |
CO2 Flux Axial | 6000 | 1525 | 3025 | 200 | 30 | keine Angabe | 0 | 1500 | 3000 | 80 | 80 | 80 | 110 | 0 | keine Angabe | 0.05 | 0.05 | 6000 | - | 8000 | Nein | ||
- |
AMADA
|
FO M II RI |
FO M II RI 3015 |
CO2 | 4000 | 3270 | 1550 | 100 | 20 | Ja | 0 | 3000 | 1500 | 0 | 0 | 0 | 0 | 0 | keine Angabe | 0 | 0 | 0 | - | 0 | Nein | ||
- |
TRUMPF
|
TruLaser serie 5000 |
TruLaser 5060 6 kw |
C02 | 6000 | 6000 | 2000 | 115 | 25 | Nein | 0 | 4000 | 2000 | 0 | 0 | 0 | 300 | 0 | Ja | 0.05 | 0.05 | 0 | Länge und Breite | 16000 | Nein | ||
- |
DURMA
|
HD-F SERIES |
HD-FL 4020 IPG 4kw |
- | 4000 | 4100 | 2100 | 200 | 15 | Ja | 1750 | 4000 | 2000 | 200 | 200 | 0 | 280 | 0 | Ja | 0.02 | 0.02 | 0 | - | 20000 | Nein | ||
- |
MECANUMERIC
|
MECALASE |
MECALASE ML 3015 |
- | 1450 | 3050 | 3050 | 1510 | 0 | Nein | 0 | 3000 | 1500 | 300 | 300 | 0 | 300 | 300 | Nein | 0.05 | 0.05 | 0 | - | 3300 | Nein | ||
- |
TRUMPF
|
TruLaser serie 5000 |
TruLaser 5030 Fiber 5 kw |
Faserlaser | 5000 | 3000 | 1500 | 115 | 25 | Nein | 0 | 3000 | 1500 | 170 | 200 | 80 | 265 | 0 | Ja | 0.05 | 0.05 | 45 | Länge und Breite | 0 | Ja | ||
- |
LVD
|
Sirius |
SIRIUS 3015 |
CO2 | 4000 | 3080 | 1550 | 250 | 20 | keine Angabe | 0 | 3050 | 1525 | 120 | 120 | 30 | 0 | 0 | keine Angabe | 0.025 | 0.05 | 0 | - | 0 | Nein | ||
- |
MITSUBISHI
|
eX |
CrossFlow 60 |
- | 6000 | 3100 | 1565 | 150 | 25 | Nein | 930 | 3000 | 1500 | 0 | 0 | 0 | 140 | 0 | Ja | 0.01 | 0.05 | 98 | - | 0 | keine Angabe | ||
- |
Eagle
|
eSmart |
eSmart |
Faserlaser | 4000 | 3000 | 1500 | 100 | 20 | Nein | 0 | 0 | 0 | 100 | 100 | 100 | 0 | 0 | Ja | 0 | 0 | 0 | Breite | 0 | Nein | ||
- |
LVD
|
Impuls |
IMPULS 8030 |
CO2 Flux Axial | 6000 | 3150 | 4070 | 280 | 25 | keine Angabe | 0 | 8000 | 3100 | 85 | 85 | 0 | 0 | 0 | keine Angabe | 0.025 | 0.05 | 0 | - | 0 | Nein | ||
- |
AMADA
|
LCG AJ |
- | 2000 | 3050 | 1550 | 100 | 16 | Nein | 920 | 3000 | 1500 | 0 | 0 | 0 | 170 | 45 | Ja | 0.05 | 0.05 | 0 | - | 0 | Nein | |||
- |
TRUMPF
|
TruLaser serie 1000 |
TruLaser 1030 |
CO2 | 0 | 3000 | 1500 | 76 | 16 | Nein | 0 | 3000 | 1500 | 60 | 60 | 40 | 85 | 0 | Ja | 0.1 | 0.1 | 0 | Länge | 9000 | Nein | ||
- |
MAZAK
|
Hybride |
SUPER-TURBO-X 2412, 3015 ou 4020 |
- | 4000 | 3070 | 1545 | 90 | 20 | Nein | 930 | 3000 | 1500 | 50 | 50 | 25 | 70 | 50 | Nein | 0.005 | 0.01 | 66 | - | 12700 | Nein | ||
- |
DURMA
|
HD-F SERIES |
HD-F 3015 IPG 3kw |
- | 3000 | 3060 | 1550 | 200 | 15 | Ja | 1000 | 3000 | 1500 | 200 | 200 | 0 | 280 | 0 | Ja | 0.02 | 0.02 | 0 | - | 12000 | Nein | ||
- |
BYSTRONIC
|
ByStar Fiber |
ByStar Fiber 4020 - Fiber 3000W |
Faserlaser | 3000 | 4105 | 2100 | 100 | 20 | Ja | 1900 | 4000 | 2000 | 120 | 120 | 20 | 170 | 50 | Ja | 0.05 | 0.05 | 21 | Länge | 14500 | Nein | ||
- |
LVD
|
Orion |
Orion 3015 Plus |
CO2 | 4000 | 3080 | 1550 | 240 | 16 | keine Angabe | 0 | 3000 | 1500 | 100 | 100 | 15 | 0 | 0 | keine Angabe | 0.025 | 0.05 | 0 | - | 13000 | Nein | ||
- |
TRUMPF
|
TruLaser serie 3000 |
TruLaser 3040 Fiber 3kw |
Faserlaser | 3000 | 4000 | 2000 | 115 | 20 | Ja | 0 | 4000 | 2000 | 100 | 100 | 80 | 140 | 0 | Ja | 0.05 | 0.05 | 34 | Länge und Breite | 0 | Nein | ||
- |
TRUMPF
|
TruLaser serie 3000 |
TruLaser 3040 4 kw |
CO2 | 4000 | 4000 | 1500 | 115 | 20 | Ja | 0 | 4000 | 2000 | 100 | 100 | 80 | 140 | 0 | Ja | 0.05 | 0.05 | 0 | Länge und Breite | 14000 | Nein | ||
- |
BYSTRONIC
|
ByCut Smart |
ByCut Smart 6225 4000W |
Faserlaser | 4000 | 6240 | 2540 | 150 | 0 | Nein | 3650 | 6200 | 2500 | 100 | 100 | 20 | 140 | 0 | Ja | 0.1 | 0.1 | 24 | Länge | 21000 | Nein | ||
- |
BODOR
|
I7 |
Laser plat BODOR i7 - 1000 W fibre IP |
- | 1000 | 1500 | 3000 | 75 | 10 | Nein | 300 | 1500 | 1000 | 60 | 60 | 60 | 60 | 0 | Nein | 0.03 | 0.02 | 11 | - | 2500 | Nein | ||
- |
BYSTRONIC
|
BySmart Fiber |
BySmart Fiber 3015 10000 W |
Faserlaser | 10000 | 3106 | 1582 | 100 | 0 | Nein | 1850 | 3000 | 1500 | 100 | 100 | 20 | 140 | 0 | Ja | 0.1 | 0.1 | 18 | Länge | 11800 | Nein | ||
- |
BODOR
|
Laser Plat BODOR P4020 - 6000 W Fibre IPG |
- | 4000 | 4000 | 2000 | 300 | 0 | Nein | 0 | 4000 | 2000 | 200 | 200 | 200 | 0 | 0 | Nein | 0.03 | 0.05 | 0 | - | 12000 | Nein |
CO2-Laser sind seit Jahrzehnten im Einsatz und werden es wohl auch noch ein ganzes Weilchen bleiben. Dennoch drängen Faserlaser sich mit zunehmendem Entwicklungsgrad weiter und weiter auf, auch im mittleren Blechdickenbereich.
Kohlenstoffdioxidlaser sind Gaslaser, die über die Benutzung von Spiegeln zum Werkstück geleitet werden. Faserlaser hingegen sind sogenannte Festkörperlaser. Die im Gegensatz zum CO2-Laser 10 Mal geringere Wellenlänge ermöglicht eine Einkopplung des Lasers über Glasfaser. Seit der Einführung des Faserlasers vor wenigen Jahren sowie seiner stetigen Weiterentwicklung hat sich das Verfahren mit einigen vorteilhaften Eigenschaften im Markt etabliert.
Die allgemeinen Vorteile von Faserlasern präsentieren sich wie folgt: Wirkungsgrad von 30% und damit dreimal höher als beim CO2-Laser (10%) Höhere Schnittgeschwindigkeiten bei dünnen und mittleren Blechdicken deutlich geringere Betriebs- und Wartungskosten (keine Spiegel, kein CO2, geringerer Kühlaufwand, keine Nachkalibrierung der Resonatoren usw.) Geringer Energieverlust bei Weiterleitung des Lasers auf größeren Portalen Bearbeitung von Nicht-Eisen-Metallen wie Kupfer oder Messing
Faserlaser-Schneidanlagen verfügen nichtsdestotrotz auch über Schwachstellen, weswegen sie sich noch nicht anschicken, den CO2-Laser alsbald in den Ruhestand zu verabschieden. Kohlendioxidlaser sind nach wie vor die erste Wahl im Dickblechbereich, wenn auch sich mit modernen Faserlasern mittlerweile Baustahl zwischen 20 und 25 mm bei hoher Qualität bearbeiten lässt.
Letztendlich sind die Vor- und Nachteile relativ zu sehen, da die individuellen Anwendungsspektren eines jeden Betriebes maßgebend sind: Wer mit dünnen bis mittleren Blechstärken arbeitet, wird die Nachteile einer Faserlaserschneidanlage als unwichtig ansehen. Je dicker das zu bearbeitende Material wird, desto mehr werden wiederum die Vorteile der CO2-Laserschneidanlage in den Vordergrund treten, mit weniger Beachtung für die jeweiligen Unzulänglichkeiten.
Daher setzen die meisten Hersteller auf beide Technologien, da sie sich nach wie vor ausgezeichnet ergänzen.